EMC Kabeldrüssel (Metrisch/Pg Fuedem)
EMC Kabeldrüssel (Metrisch/Pg Fuedem)
Aféierung
Kabeldrüsen ginn haaptsächlech benotzt fir d'Kabele vu Waasser a Staub ze klemmen, ze fixéieren, ze schützen. Si gi wäit op sou Felder applizéiert wéi Kontrollbrett, Apparater, Luuchten, mechanesch Ausrüstung, Zuch, Motoren, Projeten etc.
Mir kënnen Iech EMC Kabeldrüsen aus vernickeltem Messing (Bestellnr.: HSM.ZX-EMV.T), Edelstol (Bestellnr.: HSMS.ZX-EMV.T) an Aluminium (Bestellnr.: HSMAL.ZX-EMV.T).
| Material: | De baussenzege Metal ass Messing Néckelplating, de Kär ass Silicon Gummistécker, an de Fréijoer ass STAINLESS Stol |
| Temperaturbereich: | Min -50℃,Max 150℃ |
| Schutzgrad: | Am Spannberäich, säi Schutzgrad kann IP68 erreechen |
| Zertifikat: | CE |
Spezifizéierung
(Kontaktéiert eis w.e.g. fir méi Informatioun wann Dir aner Gréissten oder Threads braucht, déi net an der folgender Lëscht abegraff sinn.)
| Artikel Nr. | Kabel Dimensioun (mm) | Kabel Duerchmiesser (mm) | Fuedemlängt (mm) | Duerch Connecting Terminal | Schëld Effektiv Drot Duerchmiesser (mm) | H(mm) | SW1/SW2 (mm) |
| HSM.ZX-EMV.T-M12/8(S) | M12×1.5 | 5~8 | 6 | 7 | 3,5-7 | 20 | 17/17 |
| HSM.ZX-EMV.T-M12/8-T | M12×1.5 | 4~8 | 6 | 7.5 | 4-7 | 33 | 17/17 |
| HSM.ZX-EMV.T-M16/8 | M16×1.5 | 5~8 | 6 | 7 | 3,5-7 | 23 | 17/18 |
| HSM.ZX-EMV.T-M16/9.5-T | M16×1.5 | 4~9,5 | 7 | 9.5 | 6,5~9 | 36 | 22/22 |
| HSM.ZX-EMV.T-M18/10 | M18×1.5 | 7~10 | 7 | 10.2 | 6~10 | 27 | 20/20 |
| HSM.ZX-EMV.T-M22/13 | M22×1.5 | 10-13 Uhr | 7 | 12 | 8-12 | 26.5 | 24/24 |
| HSM.ZX-EMV.T-M20/12 | M20×1.5 | 7 ~ 12 | 7 | 12 | 7,5-11 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/13 | M20×1.5 | 10-13 Uhr | 7 | 12 | 8-12 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/15-T | M20×1.5 | 12-14 Uhr | 7 | 14 | 11-14 Uhr | 35 | 24/24 |
| HSM.ZX-EMV.T-M25/16 | M25×1.5 | 11-16 | 7 | 15.5 | 8-15 | 32 | 30/30 |
| HSM.ZX-EMV.T-M25/17-T | M25×1.5 | 13-17 Uhr | 7 | 16.5 | 10.5-16 | 36,5 | 30/30 |
| HSM.ZX-EMV.T-M25/19-T | M25×1.5 | 12-19 Uhr | 7 | 18.5 | 12-18 Uhr | 39 | 32/32 |
| HSM.ZX-EMV.T-M25/22-T | M25×1.5 | 18-22 | 8 | 21 | 13.5-21 | 36 | 36/36 |
| HSM.ZX-EMV.T-M25/20-T | M25×1.5 | 16-20 | 7 | 19 | 12-19 Uhr | 34,5 | 30/30 |
| HSM.ZX-EMV.T-M27/17-T | M27×2.0 | 14-17 Uhr | 8 | 18 | 11-16 | 36,5 | 30/30 |
| HSM.ZX-EMV.T-M30/21 | M30×2.0 | 14-21 | 8 | 20.5 | 12.5-20 | 30 | 36/36 |
| HSM.ZX-EMV.T-M32/19 | M32×1.5 | 14-19 Uhr | 8 | 21 | 13.5-18 | 31 | 32/36 |
| HSM.ZX-EMV.T-M32/20-T | M32×1.5 | 16-20 | 8 | 19 | 12-19 Uhr | 33,5 | 30/36 |
| HSM.ZX-EMV.T-M32/21-T | M32×1.5 | 17-21 Uhr | 8 | 22 | 14.5-20 | 38 | 36/36 |
| HSM.ZX-EMV.T-M32/23 | M32×1.5 | 18-23 | 8 | 22 | 15.2-22 | 27.5 | 36/36 |
| HSM.ZX-EMV.T-M32/23-T | M32×1.5 | 18-23 | 8 | 22.8 | 14.8-22 | 36 | 36/36 |
| HSM.ZX-EMV.T-M32/25-T | M32×1.5 | 19-25 Uhr | 8 | 25 | 18-24 | 39 | 38/38 |
| HSM.ZX-EMV.T-M33/21 | M33×2.0 | 17-21 Uhr | 8 | 21 | 14-20 Uhr | 28.5 | 36/36 |
| HSM.ZX-EMV.T-P16/14 | PG16 | 10-14 Uhr | 7 | 13 | 8,5-12 | 27 | 24/24 |
| HSM.ZX-EMV.T-P21/19-T | PG21 | 14-19 Uhr | 7 | 18.5 | 13-18.5 Uhr | 40 | 32/32 |
| HSM.ZX-EMV.T-P21/20 | PG21 | 16-20 | 7 | 18 | 11-19 Uhr | 30 | 30/30 |
| HSM.ZX-EMV.T-P21/20-T | PG21 | 16-21 | 7 | 21 | 11.5-21 | 38 | 32/32 |
Applikatioun
